Waveshare LED-Display 5.83 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot

Overview This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications Operating voltage: 3.3V~5V Interface: SPI Outline dimension: 125.40mm × 99.50mm Display size: 118.80mm × 88.26mm Dot pitch: 0.198 × 0.197 Resolution: 600 × 448 Display color: red, black, white Grey level: 2 Full refresh time: 14s Refresh power: 26.4mW(typ.) Standby power: <,0.017mW Viewing angle: >,170° Weight: 0.05 kg Interface SYMBOLDESCRIPTION VCC 3.3V~5V GND Ground DIN SPI MOSI pin CLK SPI SCK pin CS SPI chip selection, low active DC Data/Command selection (high for data, low for command) RST External reset, low active BUSY Busy status output, low active Lieferumfang: 5.83inch e-Paper (B) x1 e-Paper Driver HAT x1 RPi screws pack (2pcs) x1 PH2.0 20cm 8Pin x1 Dokumentation &, Downloads Wiki : www.waveshare.com/wiki/5.83inch_e-Paper_HAT_(B)_