Waveshare LED-Display 4.2 400×300 ePaper Display Modul mit SPI Interface

Übersicht This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Eigenschaften No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Spezifikationen Operating voltage: 3.3V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 103.0mm × 78.5mm Display size: 84.8mm × 63.6mm Dot pitch: 0.212 × 0.212 Resolution: 400 × 300 Display color: black, white Grey level: 2 Full refresh time: 4s Refresh power: 26.4mW(typ.) Standby power: <,0.017mW Viewing angle: >,170° Interface SYMBOL DESCRIPTION VCC 3.3V GND Ground DIN SPI MOSI pin CLK SPI SCK pin CS SPI chip selection, low active DC Data/Command selection (high for data, low for command) RST External reset, low active BUSY Busy status output, low active Lieferumfang 4.2inch e-Paper Module PH2.0 20cm 8Pin Dokumentation / Downloads https://www.waveshare.com/wiki/4.2inch_e-Paper_Module