Bondtech CHT Coated Brass Nozzle 0,25 mm -1 pcs (Hotend), 3D Drucker Zubehör

Main Advantages Higher melt capacity by increasing the surface area of the heating wallsAffordable priceMachined with ultra-precisionBrass nozzle with Nickel coated surfaceFollows the RepRap standard (M6×1×7.5×12.5)May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT™ technology: Bondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coatin A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface. Recommended Materials Use this nozzle with the following materials: PLAABSHIPSPCTPUTPENylonPETGASAPPPVA For technical and abrasive materials we recommend to use other nozzles in our range. Different nozzle sets for different materials We recommend you to have several sets of nozzles because: Using different materials with the same nozzles causes deposit build-up inside the nozzle.These deposits will cause blockages.We recommend changing nozzles when changing materials. Check the White Paper: "Increasing Melt Capacity With 3 Nozzle Features" They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / MagnumMosquito® LiquidMosquito® Magnum+Copperhead™E3D V4, V5 and V6 blocksE3D Chimera and KrakenRepRap M6.