Waveshare LED-Display 9.7 1200x825 ePaper Display HAT für Raspberry Pi

Übersicht This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Eigenschaften No backlight, keeps displaying last content for a long time even when power down Low power consumption, basically power is only required for refreshing Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32) Spezifikationen Operating voltage: 5V Interface: USB/SPI/I80/I2C Outline dimension: 218.8mm × 156.425mm × 1.15mm Display size: 202.8mm × 139.425mm Dot pitch: 0.169 × 0.169 Resolution: 1200 × 825 Display color: black, white Gray scale: 2-16 (1-4 bit) Full refresh time: <,1s Total refresh power: 0.6W(typ.) Total standby power: 0.3W(typ.) Viewing angle: >,170° Interface SYMBOLDESCRIPTION 5V Power input GND Ground MISO SPI MISO pin MOSI SPI MOSI pin SCK SPI SCK pin CS SPI chip selection, low active RST External reset, low active HRDY Busy status output, low active Lieferumfang 9.7inch e-Paper x1 e-Paper IT8951 Driver HAT x1 9.7inch e-Paper Adapter x1 33PIN FFC (same side contact) x1 RPi screws pack (2pcs) x1 PH2.0 20cm 8Pin x1 Dokumentation / Downloads https://www.waveshare.com/wiki/9.7inch_e-Paper_HAT